Dimensions & Patterns
Paver sizes are nominal and may vary by batch, product type, and colour.
Sizing
Sizes and coverage per m² are nominal and may vary. Consult your Sales Advisor when mixing colours or patterns.
Product Inspection
Inspect all products upon delivery. Report any issues to Customer Service before laying.
Colour Variation
Natural variation occurs within and between batches. Website images are indicative only.
Matching Existing Products?
If matching existing pavers, contact our Sales Team for the best available match.
Installation Guidelines
Allow 2–3mm joints between pavers for jointing sand. A base course layer is recommended for areas with vehicular traffic.
Driveways & Crossovers
Use a sub-base layer under clay pavers for driveways. Check with your local shire for crossover requirements.
Colour Blending
Mix pavers from multiple packs during installation for consistent colour blending.
Tyre Marks & Fading
Tyre marks may occur due to vehicle movement. Concrete pavers may fade over time, sealing is recommended to reduce staining and preserve colour.
Sealing
Seal pavers to protect against wear, staining, and salt attack, especially in coastal or harsh environments. Follow sealer manufacturer guidelines.
Pools
Use matching bullnose pavers for pool edging. Seal a minimum 2m area around the pool and reseal periodically. For salt-prone areas, seal both sides of bullnose pavers before installation.
Pallets
Some products are delivered on pallets requiring a refundable deposit. Part pallets and loose loading may be available, conditions apply. Contact Customer Service for details.
Cleaning
Avoid high-pressure water cleaning, it may damage surfaces. Never use acid-based cleaners on concrete or masonry products. Follow safety instructions on chemical packaging.
Staining & Efflorescence
Stains or efflorescence may appear post-installation. These are common on porous materials like pavers, bricks, and mortar.
Chipping & Breakage
Minor chips or breakage (up to 5%) may occur during handling. Use these for cuts and infills.
Standards Compliance
Products meet dimensional tolerances under AS/NZS 4455. Contact Midland Brick for details.
Cutting Guidelines
Wet pavers before cutting to prevent staining. Wash off slurry and avoid contact with laid pavers.
