10.01

$763.39 Per Pallet
$4.24 Each Price inc GST and excludes cartage fee
Try the Product Visualiser

Description

100mm wide standard concrete blocks combine strength, durability, and ease of construction and provide highly cost effective solutions for everyday construction applications.  Standard colours available are Grey and Limestone.

Specifically tailored and designed blocks in custom colours can be manufactured.  These are made to order products, minimum quantities and production lead time apply.

Also available in the following profiles (not through the online shop): 10.02, 10.03, 10.04/10.85, 10.12, 10.31/20.83, 10.83 and 10.71. For full details on shapes, sizes and colours, please contact a Midland Brick representative or view the Masonry Blocks brochure in the Resources section below.

Technical Data

Product InformationM10.01CA 390X90X190 FULL LENGTH CARBONM10.01NG 10.01NG 390X90X190 FULL LENGTH NATURAL GREYM10.01PA 10.01PA 390X90X190 FULL LENGTH PARCHMENTM10.01AL 390X90X190 FULL LENGTH ALABASTERM10.01LS 390X90X190 FULL LENGTH LIMESTONE
Work Size (mm)390x90x190390x90x190390x90x190390x90x190390x90x190
Dimensional CategoryDW1DW1DW1DW1DW1
Average Dry Unit Weight (kg)1010101010
Approximate Blocks per m²12.512.512.512.512.5
Blocks Per Pack180180180180180
Nominal Pack Weight (kg) includes+3% moisture18541854185418541854
Mean Characteristic Unconfined Compressive Strength (MPa) ƒ'uc>12>12>12>12>12
Cold Water Absorption (%)<10<10<10<10<10
Durability ClassGeneral PurposeGeneral PurposeGeneral PurposeGeneral PurposeGeneral Purpose
Potential to EffloresceNil-SlightNil-SlightNil-SlightNil-SlightNil-Slight
Liability to Lime PittingNilNilNilNilNil
Fire Resistance – Insulation (min) – Single Leaf unrendered wall6060606060
Fire Resistance – Insulation (min) – Fully grouted and rendered both sides9090909090

Resources

Explore More

Important Information

Pallets

All masonry blocks are supplied on pallets only.  This will incur an additional cost per pallet and is refundable upon return.

Shrinkage & Control Joints
Concrete masonry products shrink over time. For unreinforced walls, control joints must be placed at intervals no greater than 6 metres. [Refer to our Technical Manual for details.]

Product Inspection
Inspect all blocks upon delivery. Report any concerns to Customer Service before laying.

Block Face

Blocks are manufactured with only one purpose made face.  If two faces are required for a project, please discuss with a Midland Brick Representative prior to ordering.

Colour Variation
Natural variation in colour may occur within and between batches. Website images are indicative only.

Matching Existing Products?
If matching existing blocks, contact our Sales Team for the best available match. Some variation between batches is normal.

Chipping & Breakage
Minor chips or breakage (up to 5%) may occur during handling. Use these for cuts and infills.

Sizing
Sizes and coverage per m² are nominal and may vary due to manufacturing and installation methods. Consult your Sales Advisor when mixing colours or patterns.

Standards Compliance
Products meet dimensional tolerances under AS/NZS 4455. Contact Midland Brick for more information.

Colour Blending
For consistent colour blending, mix blocks from multiple packs during installation.

Cutting Guidelines
Wet blocks before cutting to reduce staining. Wash off slurry immediately and avoid contact with laid blocks.

Wet weather

During wet weather we recommend all blocks onsite are covered with plastic

Block laying

All blocks must be laid dry and must not be wetted, except in extremely hot or dry conditions.  In these circumstances it may be desirable to lightly spray the bonding surface with water immediately before laying.  Confirm with your builder prior to laying.