Standard (1 Course)

Bricks Face Bricks Utility Bricks
Sort by :
Limestone Hue

Limestone Hue

$463.75 Per Pack
Classic Range Made to Order
Midnight

Midnight

$1,954.47 Per Pallet
Foundry Range In Stock
Nouveau Grey

Nouveau Grey

$463.75 Per Pack
Classic Range Made to Order
Nouveau Grey Tumbled

Nouveau Grey Tumbled

$568.03 Per Pack
Classic Range Made to Order
Olde Red

Olde Red

$1,954.47 Per Pallet
Foundry Range In Stock

Western Australia

 

 
Panna Cotta

Panna Cotta

$1,954.47 Per Pallet
Foundry Range In Stock
Recycled Brick Extruded

Recycled Brick Extruded

$1,558.33 Per Pallet
Enquire Now Recycled Bricks
Recycled Brick Pressed

Recycled Brick Pressed

$1,558.33 Per Pallet
Enquire Now Recycled Bricks
Red Clinker

Red Clinker

$1,954.47 Per Pallet
Foundry Range In Stock

Build brick. Build forever.

 

 
Red Smooth

Red Smooth

$463.75 Per Pack
Classic Range Enquire Now
Red Smooth Tumbled

Red Smooth Tumbled

$568.03 Per Pack
Classic Range Made to Order
Restoration Red

Restoration Red

$463.75 Per Pack
Classic Range Enquire Now
Restoration Red Tumbled

Restoration Red Tumbled

$568.03 Per Pack
Classic Range Made to Order
Subiaco Red

Subiaco Red

$463.75 Per Pack
Classic Range Made to Order

Other Products

Bricks

Pavers

Cultured Stone

Blocks

Frequently Asked Questions

Are bricks or blocks better for building homes in Australia?

Both are popular. Bricks are favoured for their insulation, durability, and classic appearance, while concrete blocks are often used for structural speed and cost-efficiency.

Do bricks perform well in Australia’s varying climates?

Yes. Bricks naturally regulate temperature, keeping homes cooler in summer and warmer in winter—ideal for both coastal and inland regions.

Are pavers suitable for Australian driveways and patios?

Absolutely. Our pavers are designed to handle Australia’s harsh UV and varying weather. They’re ideal for driveways, pool areas, and outdoor entertaining spaces.

Face Bricks

Standard face bricks have one finished face only.

Colour Variation

Clay bricks are made from natural materials, so colour variation is expected within and between batches. Sample bricks and website images are indicative only.

Solid vs Cored Bricks

Colour may differ between solid and cored bricks of the same name.

Matching Existing Bricks?

If you’re matching to existing bricks, contact our Sales Team for the best available match. Natural variation between batches is normal.

Product Inspection

Inspect all bricks, blocks, and pavers upon delivery. Report any concerns to Customer Service before laying.

Chipping & Breakage

Minor chips or breakage (up to 5%) may occur during handling. Use these for cuts and infills.

Sizing

Sizes and coverage per m² are nominal and may vary due to manufacturing and installation methods. Consult your Sales Advisor when mixing colours or patterns.

Colour Blending

For consistent colour blending, mix bricks from multiple packs during installation.

Cutting Guidelines

Wet bricks before cutting to prevent surface staining. Wash off slurry immediately and avoid contact with laid bricks.

Score Marks

Textured bricks may show minor score or drag marks from manufacturing. These are normal and do not affect appearance.

Two-Storey Projects

We offer onsite placement of your Midland Brick products in the required safe area for contracted crane lifts to your first, second and above floors. Deliver all bricks at once to maintain colour consistency. Charges apply—contact Customer Service on 13 15 40.

Coastal Areas

Use sealed joints and exposure-grade bricks with a proper damp proof course for coastal protection.

Damp Proof Course (DPC)

A correctly installed DPC above ground level is essential to protect bricks from moisture and salt damage, preserving their colour and integrity.

External Use

Not all utility bricks are suitable for outdoor applications. Please consult your Midland Brick Sales Advisor.

Colour & Texture

Utility bricks are typically used internally or rendered, so colour and texture are not guaranteed or considered in selection—except for paint-grade bricks, which are smooth with a square aris.

Coastal Areas

For coastal projects, use sealed joints and exposure-grade bricks with a compliant damp proof course for optimal protection.

Damp Pr oof Course (DPC)

A properly installed DPC above ground level is essential to protect brickwork from moisture and salt damage, helping preserve appearance and integrity.

Product Inspection

Inspect all bricks, blocks, and pavers upon delivery. Report any concerns to Customer Service before laying.

Colour Variation

Natural variation in colour may occur within and between batches due to the manufacturing process.

Chipping & Breakage

Minor chips or breakage (up to 5%) may occur during handling. Use these for cuts and infills.

Sizing

Sizes and coverage per m² are nominal and may vary due to manufacturing and installation methods. Speak with your Sales Advisor when mixing colours or patterns.

Standards Compliance

Products meet dimensional tolerances under AS/NZS 4455. Contact Midland Brick for details.

Cutting Guidelines

Wet bricks before cutting to reduce staining. Wash off slurry immediately and avoid contact with laid bricks.

Dimensions & Patterns

Installation Guidelines

Allow 2–3mm joints between pavers for jointing sand. A base course layer is recommended for areas with vehicular traffic.

Driveways & Crossovers

Use a sub-base layer under clay pavers for driveways. Check with your local shire for crossover requirements.

Tyre Marks & Fading

Tyre marks may occur due to vehicle movement. Concrete pavers may fade over time, sealing is recommended to reduce staining and preserve colour.

Sealing

Seal pavers to protect against wear, staining, and salt attack, especially in coastal or harsh environments. Follow sealer manufacturer guidelines.

Pools

Use matching bullnose pavers for pool edging. Seal a minimum 2m area around the pool and reseal periodically. For salt-prone areas, seal both sides of bullnose pavers before installation.

Pallets

Some products are delivered on pallets requiring a refundable deposit. Part pallets and loose loading may be available, conditions apply. Contact Customer Service for details.

Cleaning

Avoid high-pressure water cleaning, it may damage surfaces. Never use acid-based cleaners on concrete or masonry products. Follow safety instructions on chemical packaging.

Staining & Efflorescence

Stains or efflorescence may appear post-installation. These are common on porous materials like pavers, bricks, and mortar.

Product Inspection

Inspect all products upon delivery. Report any issues to Customer Service before laying.

Colour Variation

Natural variation occurs within and between batches. Website images are indicative only.

Matching Existing Products?

If matching existing pavers, contact our Sales Team for the best available match.

Chipping & Breakage

Minor chips or breakage (up to 5%) may occur during handling. Use these for cuts and infills.

Sizing

Sizes and coverage per m² are nominal and may vary. Consult your Sales Advisor when mixing colours or patterns.

Standards Compliance

Products meet dimensional tolerances under AS/NZS 4455. Contact Midland Brick for details.

Colour Blending

Mix pavers from multiple packs during installation for consistent colour blending.

Cutting Guidelines

Wet pavers before cutting to prevent staining. Wash off slurry immediately and avoid contact with laid pavers.

Shrinkage & Control Joints

Concrete masonry products shrink over time. For unreinforced walls, control joints must be placed at intervals no greater than 6 metres. Refer to our Technical Manual for details.

Product Inspection

Inspect all bricks, blocks, and pavers upon delivery. Report any concerns to Customer Service before laying.

Colour Variation

Natural variation in colour may occur within and between batches. Website images are indicative only.

Matching Existing Products?

If matching existing bricks or blocks, contact our Sales Team for the best available match. Some variation between batches is normal.

Chipping & Breakage

Minor chips or breakage (up to 5%) may occur during handling. Use these for cuts and infills.

Sizing

Sizes and coverage per m² are nominal and may vary due to manufacturing and installation methods. Consult your Sales Advisor when mixing colours or patterns.

Standards Compliance

Products meet dimensional tolerances under AS/NZS 4455. Contact Midland Brick for more information.

Colour Blending

For consistent colour blending, mix bricks or blocks from multiple packs during installation.

Cutting Guidelines

Wet blocks before cutting to reduce staining. Wash off slurry immediately and avoid contact with laid blocks.