Efflorescence Remover

Areas of Use
Efflorescence on walls and floors.

Surface Preparation

• Always test a small area of each surface to confirm suitability and desired results before starting overall application.
• Surfaces should be thoroughly cleaned and rinsed with clean water prior to sealer application.

Application

• Ensure surface to be treated is wet prior to application to prevent surface burning.
• Efflorescence Remover should be applied to affected area and left to react.
• Once visible reaction (fizzing and bubbling) has ceased, treated surface should be thoroughly rinsed with clean fresh water.
• If a second treatment is required follow above procedure.
• Refer to the Crommelin Technical Data Sheet and Sealers Full Instructions for full application information.